UMT-2D
Montāžas Teksta
- This is the UMT-2D, it is a Multi-Button & MIDI Converter. It enables external control of playback software, including QLAB, CSC, SFX, SCS, Ableton and similar packages
- Plug the UMT-2D into the computer using a USB cable.
- and the 2 LEDs will turn green, telling you the UMT2D is receiving power and is active
- There are 2× 3-Pin XLR inputs with over-voltage protection, for external push button triggering, for example MD Start/Stop boxes
- The activity LED will briefly flash red when a button is pressed
- Plugs the USB into the UMT2D and shows the LED both going green
- Plugs in a rem2,
- SPLIT SCREEN One showing the UMT2D LED flashing one showing a hand pushing the button
- There is one 9-Pin D-SUB connector to allow you to connect button panels or trigger boxes, for example the Nemesis REM8.
- CSC screen shot of the UMT2D input configuration
- Here is an example of the UMT2D working in CSC
- SPLIT SCREEN CSC input /out put monitor shows midi monitor while smaller screen shows buttons being pressed
- In addition to the button options there is a 9 pin mini din which provides MIDI IN/MIDI OUT as well.
- Plugs in a rem8
- SPLIT SCREEN Button capture in Qlab
- Here you can see the UMT2D working with Qlab
- Connects the MIDI break out cable
- Simply connect the break out cable and you have 1 MIDI in and MIDI Out
- NEMESIS UMT-2D Available from Orbital Sound and selected retail partners
Izveidoti vairāk nekā 30 miljoni stāstu shēmu